How to size a position from your risk

Position sizing decides how much you buy or sell. It estimates the loss at your planned stop; costs, slippage and gaps can make the actual loss larger. This guide shows the formula and three worked examples.

Educational content, not financial advice. The numbers below are examples. Trading carries a high risk of loss, and you can lose more than the amount you plan to risk.

The short answer

Position size is the amount you are willing to lose on a trade, divided by what one unit of the position loses if your stop is hit.

  1. Choose how much money you accept losing on this trade (your risk).
  2. Measure the distance from your entry to your stop.
  3. Divide your risk by the loss per unit at that distance. That is your position size.

Step 1: decide how much you risk per trade

Traders often set the risk as a percentage of the account, so it scales as the account grows or shrinks. With a $10,000 account and a risk of 1%, you risk $100 on the trade. It is common to keep the figure small, often 1% to 2% or less, because losing streaks happen. That is a rule of thumb, not a recommendation: the right number depends on your account, your strategy and how much you can afford to lose.

Step 2: measure the distance to your stop

Your stop belongs where your trade idea is proven wrong, such as just beyond the swing high or low you relied on. Do not choose it to make the position size look convenient. The distance between entry and stop can be measured in price, in points or in pips, as long as you use the same unit in the next step.

Step 3: divide

The formula is the same for every market:

Position size = risk amount ÷ (stop distance × value of one unit of distance)

For a forex pair, the value of one pip for one standard lot is the number you need. For a coin or a share, one unit loses exactly the price distance, so the size is the risk divided by the distance.

Three worked examples, each risking $100 (1% of $10,000)
MarketStop distanceLoss per 1 lot or 1 unitPosition size
EUR/USD25 pips25 × $10 = $250$100 ÷ $250 = 0.40 lots
XAU/USD (gold), sell4,455.60 to 4,458.45 = 2.852.85 × 100 oz = $285$100 ÷ $285 = 0.35 lots
BTC/USD, hypothetical60,000 to 58,500 = $1,500$1,500 per coin$100 ÷ $1,500 = 0.066 BTC

The gold row uses the stop and entry of a real Go Bell signal from 31 August 2026 (see the signal card). The EUR/USD row assumes a standard lot of 100,000 units on an account in US dollars, where one pip is worth about $10. The BTC price is invented for the example. Each result is rounded down to the broker's step (0.01 lots, 0.001 BTC), so the estimated stop loss before costs stays within the planned amount. This assumes a USD account, 100 ounces per gold lot and the stated broker steps; confirm your broker’s contract specifications. Stops do not guarantee the execution price.

Common mistakes

  • Using the same size every time. A fixed lot size means a different amount at risk on every trade, because stop distances change.
  • Moving the stop after sizing. If you widen the stop, recalculate the size. Otherwise you risk more than you planned.
  • Rounding up. Round down to the broker's lot step.
  • Ignoring costs and gaps. Spread, commission and slippage can make the loss at your stop larger than planned, and prices can jump past a stop.
  • Stacking correlated trades. Two trades that move together, such as two dollar pairs, are closer to one bigger trade.

Does leverage change the answer?

Leverage decides how much margin you need to open a position. It does not change the loss at your stop for a given size. Size the trade from your risk first, then check that your account has enough margin to hold it.

How Go OS does the math for you

In Go OS, position size is calculated from your balance and your per-trade risk limit, with the stop placed before you enter. The Go Tools screen also has calculators for position size, pip value, risk to reward, and leverage and liquidation. You still make the final call. See how the Decide step works.

Allow for costs in the risk budget. For example, reserving $5 of a $100 budget leaves $95 for the estimated stop loss. With the EUR/USD assumptions above, $95 ÷ $250 per lot = 0.38 lots. The $5 is an illustrative allowance, not a broker quote or a maximum-loss guarantee.

Quick answers

What is position sizing?

Position sizing estimates how many lots, coins or shares fit your planned risk at the stop. Actual losses can exceed that estimate because of costs, slippage or gaps.

How do I calculate lot size?

Divide the amount you want to risk by the loss per lot at your stop distance. For example, risking $100 with a 25-pip stop on EUR/USD, where a pip is worth about $10 per lot, gives 0.40 lots.

Does a tighter stop let me trade a bigger size?

The formula gives a bigger size, but a tighter stop is also hit more often. Sizing estimates the loss at the planned stop; it cannot guarantee the loss or whether the trade works.

Sources and scope

These educational examples explain general mechanics. Product descriptions are attributed to GO AI’s published materials; they are not an independent performance or Sharia review. Check your broker’s specifications and obtain qualified advice for your circumstances.